WaterPro water purification systems provide point of use pure water for the laboratories. Using water softener, reverse osmosis technique and polishing station it provides water at its purest Technologies used include carbon filtration, deionization, organic adsorption, ultra filtration, ultraviolet exposure and micro-porous filtration. Type I, Low TOC, and pyrogen-free are the types of pure water produced by the WaterPro water polishing stations.

WaterPro RO Stations

WaterPro RO Stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water. RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing.

Features :

	Dispensing rate: 1 Liter per minute or better
	Cartridges : Large cartridges of over 20 inches each for a long life.
	Integrated Storage tank of around 17 Liter at outlet of RO.
	Automatic flush valve, which extends RO membrane life, it automatically initiate the purification process by flushing the RO membrane and tank for three minutes after each 12 hour period of inactivity.

Removal efficiency of the RO water system :

Suspended solids- 100%	:	Bacteria - 99.5%
Viruses -99.5%	:	Pyrogens - 99.5%, Organic
Molecular - 97-99.5%	:	Weight>250 Daltons
Monovalent inorganics	:	94-86%
Divalent Inorganics	:	96-98%
Trivalent Inorganics	:	98-99%

Waterpro PS Polishing Station ( Ultra Pure Water )

The WaterPro PS polishing station delivers up to 18.2 megohm-cm of Type I water, from the dispensable valve or optional retrievable gun at a typical rate of 1.8 litres per minute depending on feed water flow rate and pressure, and installed purification modules.

Benefits :

	Timed dispense for unattended operation.
	Automatic/intermittent re-circulation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time.
	Attractive and corrosion-resistant type 304 stainless steel front panel.
	Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water.
	Water quality alert. LED flashes the actual megohm-cm when water quality falls below the set point.
	Built-in dispensing center
	Quiet 1/4 hp motor and rotary vane re-circulation pump’
	Dispensing valve
	Wall mountable design
	TOC dump valve allows a small portion of purified water to drain during automatic re-circulation to maintain low TOC levels (Analytical Instrument and Hybrid models).
	UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic re-circulation to extend the life of the ultrafilter (Life Science and Hybrid models).

.........................................................................................................................................................

Optional Accessories :
 Mobile Stand
 Support Stand
 Dispensing Gun
 70 Litres Storage Tank